Aggregate Sieve Test Set, Ø 200 mm

Product Code	Product Description
PRS-AELK200	Aggregate Sieve Test Set, Ø 200 mm

STANDARDS : EN 993-1, EN933-2, ASTM  E11, AASTHO  T27, BS 410

Sieve Analysis is done in order to determine whether the aggregate's granulometry is suitable for concrete. We need to determine how close we are to the ideal curve with the calculated granulometry curve.

Sieve set is required according to Aggregate Sizes for sieve analysis.

Sieve pulley diameter is 200 mm and sieve pulleys are made of stainless steel

Aggregate Sieve Set

 31.5 mm  ,25 mm , 22.4 mm , 16 mm , 11.2 mm , 8 mm , 5.6 mm , 4.75 mm , 4 mm , 2 mm , 1 mm , 0.500 mm , 0.250 mm , 0.125 mm , 0.063 mm + Receiver & Lid

Crushing Resistance of Lightweight Aggregates

Product Code	Product Description
PRS-ACRESAP180	Crushing Resistance  Of Lightweight  Aggregates
PRS-ACRESAP100	Crushing Resistance  Of Lightweight  Aggregates

STANDARDS : TS EN 13055-1

Apparatus for the determination of the crushing resistance of lightweight aggregate, composed by: ring with adjustable height, upper and lower cylinderm piston, base.
Made of steel, plated against corrosion.

Specific Gravity Frame

Product Code	Product Description
PRS-A1000	Specific Gravity Frame
PRS-A1003	Plastic Water Tank
PRS-A1005	Cradle for Hardened Concrete Specimens
PRS-A1010	Density Basket Ø 200 mm x 200 mm deep

STANDARDS : EN 1097-6, 12390-7

The Specific Gravity Frame is used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates.

Consisting of a purpose built robust frame designed to support the electronic balance (not supplied), a wire basket and plastic water tank. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water.

Any type of electronic balance fitted with under-bench weighing facility can be used. Balance, Cradle and Density Basket should be ordered separately.

The Specific Gravity Frame is supplied complete with;

A water tank

Sand Equivalent Test Sets

Product Code	Product Description
PRS-ASETS001/E	Sand Equivalent Test Set, EN Model
PRS-ASETS001/A	Sand Equivalent Test Set, ASTM Model
PRS-ASETS003/E	Sand Equivalent Measuring   Two Graduated Cylinder, EN
PRS-ASETS003/A	Sand Equivalent Measuring Graduated Cylinder, ASTM
PRSGH-1425	Moisture Content TinSand Equivalent Measuring Tin with Lid, Aluminium, Ø:55 mm x h:35 mm
PRS-ASETS006	Sand Equivalent Siphon Assembly
PRS-ASETS007/E	Sand Equivalent Test Plunger Assembly,EN
PRS-ASETS007A	Sand Equivalent Weighted Foot Assembly,ASTM
PRS-ASETS007	Washing and Flocculating Solution (Stock Solution), 1 lt

STANDARDS : EN 933–8; ASTM D2419; AASHTO T176; UNI 8520–15; UNE 83131; CNR No. 27

The Sand Equivalent Test Set is used to determine the fines of aggregates.

The test set is supplied with  4 transparent acrylic plastic measuring cylinders, siphon assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube) 5 lt. plastic can, weighted foot assembly, measuring can, wide-mouth funnel, and ruler.

Washing and Flocculating (Stock Solution) should be ordered seperately.

The Sand Equivalent Test Set is supplied complete with;

Transparent Graduated Acrylic Plastic Measuring Cylinder, 4 units

Transparent Acrylic Plastic Measuring Cylinder - 4 units

Siphon Assembly (irrigator tube with valve, solid rubber stopper, siphon tube and hose, blow tube,

Plastic can - 5 lt.

Weighted Foot Assembly,

Measuring Tin,

Wide-Mouth Funnel,

Ruler,

Special Carrying Case,

Sand Equivalent Shaker

Product Code	Product Description
PRS-ASES0105	Sand Equivalent Shaker

STANDARDS : EN 933-8 / ASTM D2419 / AASHTO T176 / BS 1924 / UNI 8520-15 / UNE 83131

Sand Equivalent Shaker is used for the uniform shaking of Sand Equivalent Measuring Cylinders, at a specified rate and stroke.

The horizontal movement, cycle and shaking time can easily be adjusted on the shaker to comply with EN or ASTM standards.

The Sand Equivalent Shaker is supplied complete with;

Safety Cover (conforming with CE directives)

Timer

Riffle Boxes

Product Code	Product Description
PRS-ARB0300	Riffle Box 7 mm
PRS-ARB0301	Riffle Box 13 mm
PRS-ARB0302	Riffle Box 15 mm
PRS-ARB0303	Riffle Box 19 mm
PRS-ARB0304	Riffle Box 25 mm
PRS-ARB0305	Riffle Box 30 mm
PRS-ARB0306	Riffle Box 38 mm
PRS-ARB0307	Riffle Box 45 mm
PRS-ARB0308	Riffle Box 50 mm
PRS-ARB0309	Riffle Box 64 mm
PRS-ARB0310	Riffle Box 75 mm

STANDARDS : EN 932-2; ASTM C702; BS 812:1, 1377:1, 1924:1

Riffle boxes are used for dividing aggregates into 2 equal homogenous quantity for testing.

The Riffle Box is electrostatically painted and manufactured to meet the relevant International standard both in the slot width and number of slots.

The Riffle Boxes are supplied complete with;

Containers with Handles - 3 pcs