Showing posts with label Aggregate Abrasion Test Machines. Show all posts
Showing posts with label Aggregate Abrasion Test Machines. Show all posts

Tuesday, May 21, 2019

Shape Index Caliper

Product Code
Product Description
PRS-ASIC010
Shape Index Caliper



STANDARDS : EN 933-4; DIN 4226; CNR No.95; NLT 354

Shape Index Caliper
is used for the determination of the shape factor of aggregates.



Measurement range is 200 mm and graduated 

with 0.05 mm increments.

Wide Wheel Abrasion Testing Machine

Product Code
Product Description
PRS-AWW0106
Wide Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110 V 60 Hz version is available upon request)
PRS-AWW0106/1
Wide Abrasion Wheel
PRS-AWW0106/2
Convert Equipment Set from   PRS-AWW0106 Wide Wheel Abrasion Testing Machine to   PRS-AWW01306 Narrow Wheel Abrasion Testing Machine
PRS-AWW01106
Abrasive Corundum Sand 25 kg for  PRS-AWW0106 and  PRS-AWW01306
PRS-AWW01306
Calibration Marble for   PRS-AWW0106
PRS-AWW01206
Narrow Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110V 60Hz version is available upon request)
PRS-AWW01306/1
Narrow Abrasion Wheel,
PRS-AWW01306/2
Convert Equipment Set from  PRS-AWW01306 Narrow Wheel Abrasion Testing Machine to
PRS-AWW01406
Wide Wheel Abrasion Testing Machine
PRS-AWW01006
Mould, EN 12808-2, Polyethylene, 100 ±1x100 ±1x10 ±1 mm,



STANDARDS

Wide Wheel : EN 1338, 1339, 1340, 1341, 1342, 13748-1,13748-2, 14157                              

Narrow Wheel:  EN 10545-6, 12808-2

Wide Wheel Abrasion Testing Machine  is designed for determining the resistance to abrasion/wear of natural stones and concrete products used for paving.

The abrasion wheel is 70 mm thick and rotates at a speed of 75 rpm.

The machine is equipped with adigital counter which stops the machine at the end of a preset number of revolutions.

Narrow Wheel Abrasion Testing Machine is designed for determining the resistance to abrasion of unglazed tiles, grouts used for tiles and clay pavers.

The abrasion wheel is 10 mm thick. Abrasive corundum sand, calibration marble (boloneisse) and mould (for EN 12808-2) should be ordered separately. PRS-AWW0106 and PRS-AWW01306 Abrasion Testing Machines can be convert the other.

Appropriate convert equipment set should be ordered seperately.

Nordic Abrasion Machine

Product Code
Product Description
PRS-ANM0085
Nordic Abrasion Machine, 220-240 V 50 Hz  (60 Hz version is available upon request)
PRS-ANM0085/110
Nordic Abrasion Machine, 110 V 60 Hz
PRS-ANM0086
Steel Balls, Ø 15 mm dia, 7 kg.
PRS-ANM0087
Steel Balls, Ø 11.1 mm dia, 3,5 kg.


STANDARDS : EN 1097-9; UNI 8520-13-16

Nordic Abrasion Machine has been developed for testing the resistance of aggregates to wear by abrasion from studded tyres. The test is performed on natural or artificial stones and aggregates between 11.2 mm and 16.0 mm.

The test consists of a rotating aggregate in a drum containing steel abrasive balls and water. The machine consists of an electronic control unit and a rolled stainless steel drum having an internal diameter of 206.5 mm, internal length of 335 mm and thickness of 6 mm. The drum is rotated at a speed of 90 ± 3 r.p.m. 3 wings are installed inside of the drum to allow the balls and aggregates to be mixed properly.


The abrasion loss rate of aggregates is calculated after the specified number of revolutions stated in the relevant standard.
110 V 60Hz version should be mentioned on order if required.
11,1 mm diameter steel balls ( 3.5 kg.) should be ordered separately.

The Nordic Abrasion Machine is supplied complete with;
Steel Balls, Ø 15 mm, 7 kg


Micro-Deval Apparatus

Product Code
Product Description
PRS-AMDA0400
Micro-Deval Apparatus, 220-240 V 50 Hz
PRS-AMDA0420/110
Micro-Deval Apparatus, 110 V 60 Hz
PRS-AMDA0421
Stainless Steel Drum Ø 200x154 mm                EN 1097-1
PRS-AMDA0422
Stainless Steel Drum Ø 200x400 mm                   EN 13450
PRS-AMDA0423
Micro-Deval Abrasion Charges Ø10 mm 25 kg Pack, EN 1097-1

 

STANDARDS : EN 1097-1, 13450; NF P18-572, P18-576; CNR No.109; UNE 83115

The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel cylinders, and 25 kg of 10 mm diameter stainless steel spheres and an automatic digital counter which allows machine to stop automatically at the preset number of revolutions.
Stainless steel drums are rotating at a speed of 100 ± 5 r.p.m.





The machine can accept up to 4 pcs. Ø 200x154 mm drums or 2 pcs. Ø 200x400 mm drums.
Ø 200x400 mm steel drums and 1,6 mm sieve should be ordered separately.



The Micro-Deval Apparatus is supplied complete with;
Stainless Steel Drum, Ø 200x154 mm, 2 pcs.
Abrasion Charges, 25 kg, Ø 10mm

Aggregate Sieve Test Set, Ø 200 mm

Product Code Product Description PRS-AELK200 Aggregate Sieve Test Set, Ø 200 mm STAND...