Showing posts with label Servo Hydraulic Tensile Machine. Show all posts
Showing posts with label Servo Hydraulic Tensile Machine. Show all posts

Monday, May 20, 2019

Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.



 Frame Features

 Product Code
PRS-UEM050
Max. Load
50 kN
Max. Vertical Test Space
(without accessories)  (Lower crosshead at
middle stroke.

650 mm
Distance  Between Columns
440 mm
Crosshead Travel
400 mm
Test Speed Range
0-100 mm/min.
Load Rate
0,001-2 kN/s
(Depend on specimen stiffness)
Machine Class

Class 1 starting from
1% of the capacity
Encoder Resolution
0.001mm
Encoder Accuracy
0,01
Electrical Requirement
220-240V, 50-60Hz, 1 phase.
Overall Dimensions
1300x520x2300 mm
Weight Approx.
400 kg

























PRS-UEM050 supplied with;
Compression Platens
Load Cells 50 kN Capacity

ACCESSORIES
Electromechanical Universal Testing Machines are suitable for difference tests on various materials as
Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall,
Indirect Tensile, Duriez), Tiles, Flat Blocks etc. General Accessories;
 Load Cell, 5 kN Capacity
Load Cell, 50 kN Capacity
Load Cell, 300 kN Capacity
Compression Platens, used to perform uniaxial and unconfined compression tests.
 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ø:22
mm specimens)
Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature,  standard
temperature range: -40°C to +100°C (-40°F to 212°F).

Thursday, May 2, 2019

Servo Hydraulic Horizantal Tensile Test Machine 500 kN

Product Code
Product Description
PRS-SRVHORTEN1000
Servo Hydraulic Horizantal Tensile Test Machine 500 kN





STANDARDS :   ASTM A931, ASTM D4268, EN 919, ISO 2307, OCIMF, EN 1891, EN 564, EN 566, EN ISO 1346:2004, EN ISO 2307:2010

ParsRos  Servo Hydraulic Horizontal Tensile Testing Machines have a very strong frame which allows a nominal force up to 10MN.

The frame can have a length up to 40 m to perform test on real size specimens. Standardized Test
Standard tests can be performed with distance or force control. The electronic controller accurately sticks to the set parameters during the test (speed, maximum load, holding time, strain values, etc.).

The experimental procedure is completely automated, and a lot of test modules are available to comply with a wide range of standard tests.

Some test modules even allow to perform dynamic tests to determine the service life of the specimens.
It is possible to perform dynamic tests with two different approaches: with a pre-programmed waveform (sine, rectangular, etc.) or with a specified path given by the user.


APPLICATIONS
Slings
Lashings
Chains
Cables
Synthetic fiber ropes
Natural fiber ropes
And many more...
Depending on the testing requirements, vertical test machines can also be used.
Horizontal test beds are widely used for the tensile test and destruction test of kinds of wire rope slings, electrical cable fittings, steel wire ropes, synthetic ropes, chains, and shackles. It is an ideal testing machine for steel wires and ropes production, quality control and R&D lines.

They are popular in the industry of construction, building materials, metallurgical, transportation industry and energy resources industry and other units like research units, universities, quality inspection center, commodity testing department, power center and so on.

MAIN BODY

The main body is mainly composed of oil cylinder seat, piston, front portable clamping, rear portable clamping heads, crosshead and load cell etc.

Oil cylinder is installed on the cylinder seat; cylinder seat, steel plate welding frame and rear portable clamping heads are combined for the stress frame.

The specimen is placed between these two clamping heads to conduct the test.

Single cylinder rod offers impetus to the front portable clamping head and applied to specimen.
The rear portable clamping head is connected to the frame via locking pins

By the adjustment of locking pin, the backing moving crosshead could be moved along the track to adjust the test space by every 500mm.

LOADING SENSORS

Parsros Horizontal Testing Machines has the feature of connecting more than one loadcell.
Load accuracy is class 0,5. Can be increased load capacity to special applications. System identifies every loadcell automatically and calibration values are kept its memory. System closes to be exposed overload.

SERVO TECHNOLOGY  
It comprises of servo control, electro-servo valve and servo actuator and sensor. Servo control is
featured with comparison, verification and amplifier of the system input signal. 

Electro-Servo valve is featured with changing the current signal to hydraulic energy, which is the key component in the system and  the servo actuator accepts the hydraulic oil from servo valve to make action according to system requirement



Wednesday, April 24, 2019

Electromechanical Universal Test Machine, 300 kN


























Product Code
Product Description
PRS-UEM300Electromechanical Universal Test Machine, 300 kN, 220-240V,    50-60Hz, 1 ph.

STANDARDS  : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1
PRS-UEM300, 300 kN capacity Fully Automatic  Electromechanical Universal Testing Machine is
multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories,
institute laboratories and quality control laboratories for tensile, compression flexural tests under load or
displacement control for a wide range of materials.
PRS-UEM300 model Electromechanical Universal Testing Machine can be used for tensile test on any
material i.e (metal, plastic, textile, wood) by using suitable accessories.
This machine can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and
similar materials, by using suitable accessories.
This Testing Machines consists of base containing the transmission components and holds two robust columns
connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be
adjusted to set the vertical test space for different tests.
User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single
recirculating ball screw, powered by an servomotor.
Advanced closed loop control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit
to the servo motor on both models.
The operator will have large flexibility during the test with advanced microprocessor control and material testing
software installed on PC.
The machine is supplied complete with high precision load cell.
Gripping systems, extensometers and accessories are  not included and have to be ordered
separately.
ACCESSORIES
Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial
Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez),
Tiles, Flat Blocks etc.
General Accessories;
Load Cell, 5 kN Capacity
Load Cell, 50 kN Capacity
Load Cell, 300 kN Capacity
Compression Platens, used to perform uniaxial and unconfined compression tests.
Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ø:22 mm specimens)
Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature,  standard temperature range:
-40°C to +100°C (-40°F to 212°F).

Electromechanical Universal Test Machine, 50 kN






Product Code
Product Description
 PRS-UEM050
Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz,1 ph.

STANDARDS  : EN ISO 6892-1, EN ISO 15630-1 and 2, EN ISO 7500-1

PRS-UEM050, 50 kN capacity fully automatic  Electromechanical Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. 

PRS-UEM050 model  Electromechanical Universal Testing Machine can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.

These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.



Frame Features


 Product Code
PRS-UEM050
Max. Load
50 kN
Max. Vertical Test Space
(without accessories)
(Lower crosshead at
middle stroke.

650 mm
Distance  Between Columns
440 mm
Crosshead Travel
400 mm
Test Speed Range
0-100 mm/min.
Load Rate
0,001-2 kN/s
(Depend on specimen stiffness)
Machine Class

Class 1 starting from
1% of the capacity
Encoder Resolution
0.001mm
Encoder Accuracy
0,01
Electrical Requirement
220-240V, 50-60Hz, 1 phase.
Overall Dimensions
1300x520x2300 mm
Weight Approx.
400 kg

PRS-UEM050 supplied with;

Compression Platens
Load Cells 50 kN Capacity

ACCESSORIES

Electromechanical Universal Testing Machines are suitable for difference tests on various materials as Uniaxial Tests, Triaxial Tests, Steel Re-bars, Cement and Concrete, Soil (CBR), Asphalt (Marshall, Indirect Tensile, Duriez), Tiles, Flat Blocks etc. 

General Accessories;
Load Cell, 5 kN Capacity
Load Cell, 50 kN Capacity
Load Cell, 300 kN Capacity
Compression Platens, used to perform uniaxial and unconfined compression tests.
 Extensometer for universal testing machine, 50 mm gauge length, 10 mm travel (to use with max Ø:22 mm specimens)
Extensometer for universal testing machine, 50 mm gauge length, 100% strain feature,  standard temperature range: -40°C to +100°C (-40°F to 212°F).

Aggregate Sieve Test Set, Ø 200 mm

Product Code Product Description PRS-AELK200 Aggregate Sieve Test Set, Ø 200 mm STAND...