Servo Hydraulic Horizantal Tensile Test Machine 500 kN

Product Code	Product Description
PRS-SRVHORTEN1000	Servo Hydraulic Horizantal Tensile Test Machine 500 kN

STANDARDS :   ASTM A931, ASTM D4268, EN 919, ISO 2307, OCIMF, EN 1891, EN 564, EN 566, EN ISO 1346:2004, EN ISO 2307:2010

ParsRos  Servo Hydraulic Horizontal Tensile Testing Machines have a very strong frame which allows a nominal force up to 10MN.

The frame can have a length up to 40 m to perform test on real size specimens. Standardized Test

Standard tests can be performed with distance or force control. The electronic controller accurately sticks to the set parameters during the test (speed, maximum load, holding time, strain values, etc.).

The experimental procedure is completely automated, and a lot of test modules are available to comply with a wide range of standard tests.

Some test modules even allow to perform dynamic tests to determine the service life of the specimens.

It is possible to perform dynamic tests with two different approaches: with a pre-programmed waveform (sine, rectangular, etc.) or with a specified path given by the user.

APPLICATIONS

Slings

Lashings

Chains

Cables

Synthetic fiber ropes

Natural fiber ropes

And many more...

Depending on the testing requirements, vertical test machines can also be used.

Horizontal test beds are widely used for the tensile test and destruction test of kinds of wire rope slings, electrical cable fittings, steel wire ropes, synthetic ropes, chains, and shackles. It is an ideal testing machine for steel wires and ropes production, quality control and R&D lines.

They are popular in the industry of construction, building materials, metallurgical, transportation industry and energy resources industry and other units like research units, universities, quality inspection center, commodity testing department, power center and so on.

MAIN BODY

The main body is mainly composed of oil cylinder seat, piston, front portable clamping, rear portable clamping heads, crosshead and load cell etc.

Oil cylinder is installed on the cylinder seat; cylinder seat, steel plate welding frame and rear portable clamping heads are combined for the stress frame.

The specimen is placed between these two clamping heads to conduct the test.

Single cylinder rod offers impetus to the front portable clamping head and applied to specimen.

The rear portable clamping head is connected to the frame via locking pins

By the adjustment of locking pin, the backing moving crosshead could be moved along the track to adjust the test space by every 500mm.

LOADING SENSORS

Parsros Horizontal Testing Machines has the feature of connecting more than one loadcell.

Load accuracy is class 0,5. Can be increased load capacity to special applications. System identifies every loadcell automatically and calibration values are kept its memory. System closes to be exposed overload.

SERVO TECHNOLOGY  
It comprises of servo control, electro-servo valve and servo actuator and sensor. Servo control is

featured with comparison, verification and amplifier of the system input signal. 

Electro-Servo valve is featured with changing the current signal to hydraulic energy, which is the key component in the system and  the servo actuator accepts the hydraulic oil from servo valve to make action according to system requirement