Showing posts with label Concrete Test Apparatus. Show all posts
Showing posts with label Concrete Test Apparatus. Show all posts

Saturday, May 4, 2019

Slump Test Set , ASTM

Product Code
Product Description
PRS-BSTS0510A
Slump Test Set , ASTM
PRS-BSTS0512A
Slump Cone , Seemless Spun Metal, ASTM
PRS-BSTS0514A
Aluminium Base Plate with Clamps and Measuring Bridge
PRS-BSTS0516A
Slump Cone Funnel, Seemless Spun Steel
PRS-BTR16600A
Tamping Rod Ø 16x600 mm
PRS-BTR10300A
Tamping Rod Ø 10x300 mm
PRS-BRM05118A
Scoop, Flat Bottom, 24 oz.
PRS-BRM05119A
Scoop, cast aluminum, 38 oz.


STANDARDS : ASTM C143; AASHTO T119

The Slump Test Method is used for the determination of the consistency and workability of fresh concrete.


Slump Cone Funnel, made of seemless spun steel, should be ordered separately.

The Slump Test Set (  ASTM ) are supplied complete with;

Slump Cone, Seemless spun metal
Aluminium Base Plate with clamps and measuring bridge
Tamping Rod, Graduated
Scoop, cast aluminum 38oz.



TECHNICAL SPECIFICATIONS

Dimensions
550x600x250 mm (packed)
Weight (approx.)
10,4 kg



Friday, May 3, 2019

Concrete Test Hammer Calibration Anvil

Product Code
Product Description
PRS-KAKORS
Concrete Test Hammer Calibration Anvil







 STANDARDS : EN 12504-2, ASTM C805, BS 1881 : 202

The Concrete Test Hammer Calibration Anvil can be used to check the calibration of concrete test hammers after every 1,000—2,000 impacts.
The anvil has a solid steel 6in (152mm) diameter anvil with a hammer guide and hardened alloy steel rebound plate.
A hardness certification to ASTM E 18 requirements is provided. A wire brush for cleaning is included.

Concrete Mortar Penetrometer

Product Code
Product Description
PRS-CONMORPEN
ConcreteMortar Penetrometer
PRS-CONMORPENNE
Needle Set for Concrete Mortar Penetrometer  


STANDARDS : ASTM C403; AASHTO T197

Concrete Mortar Penetrometers is used for the determination of setting time of the mortar fraction of fresh concrete. The apparatus consist of a spring loading device. is graduated from 10 to 150 lbf in 2 lbf divisions. A sliding ring indicates the load reached.

 

The Concrete Mortar Penetrometer is supplied complete with;

Set of interchangeable needle points of 645, 323, 161, 65, 32, 16 mm area
A steel adaptor for needles
Carrying case




Anchor Bolt Pull Out Force Tester ( Single Acting Hydraulic Jack ) , 100 Ton

Product Code
Product Description
PRS-CBACT100
Anchor Bolt Pull Out Force Tester         ( Single Acting Hydraulic Jack ),100 Ton




 Anchor Bolt Pull Out Force Tester    is used for determining the bond strength between anchored reinforcing steel bar (rebar) and concrete and for checking anchorage performance in-situ. 

Manual Dial gauge is connected to a 100 tons capacity hydraulic jack and hand pump provides 1 % sensitive load or tensional strength value readings.

The apparatus has  hydrolic cylinder.
The apparatus is supplied complete with 8 different jaw sets which allows user to test anchorage rebar with different diameters. These jaws are made of high strength steel.

Features
1 x 700 bar hydraulic hand pump,
1 x 100 ton capacity perforated piston jack
3 meter long flexible polyflex hydraulic hose
Retainer grips and bulb
8  different jaw sets

Techical Specifications

Bulon towing capacity 104 ton
Bulon drawing course (stroke) 100 mm
Piston hole diameter diameter 80 mm
Hydraulic jacking area 149  cm²
Hose connection with screw coupling



Anchor Bolt Pull Out Force Tester ( Single Acting Hydraulic Jack ) , 50 Ton

Product Code
Product Description
PRS-CBACT50
Anchor Bolt Pull Out Force Tester (Single Acting Hydraulic Jack ) ,50 Ton






The Apparatus is used for determining the bond strength between anchored reinforcing steel bar (rebar) and concrete and for checking anchorage performance in-situ. 

Manual Dial gauge is connected to a 50 tons capacity hydraulic jack and hand pump provides 1 % 
sensitive load or tensional strength value readings.





The apparatus has  hydrolic cylinder.
The apparatus is supplied complete with 6 different jaw sets which allows user to test anchorage rebar with different diameters. These jaws are made of high strength steel.






Features
1 x 700 bar hydraulic hand pump,
1 x 50 ton capacity perforated piston jack
3 meter long flexible polyflex hydraulic hose
Retainer grips and bulb
6  different jaw sets






Container With Cover

Product Code
Product Description
PRS-CCONWC
Container With Cover
PRS-CCONWCT
Tamper







Container With Cover  is used for the determination of the relative bleeding of a fresh concrete sample, using aggregates having max. size of 50 mm.



 It is stainless steel manufactured and container, having 250 mm dia. by 280 mm height, complete with cover.

Tamper is used for this also made stainless steel
Weight: 5 kg aprox.

Concrete Pocket Penetrometer

Product Code
Product Description
PRS-BCPP0575
Concrete Pocket Penetrometer


The  Concrete Pocket Penetrometer  is designed for the determination of setting time of fresh concrete for field and laboratory use.




Stainless steel plunger has 32.3 mm² (1/20 in²) area and 0-5 MPa measuring range.
The plunger graduated 0,5 MPa.

Aggregate Sieve Test Set, Ø 200 mm

Product Code Product Description PRS-AELK200 Aggregate Sieve Test Set, Ø 200 mm STAND...