Tuesday, May 21, 2019

Nordic Abrasion Machine

Product Code
Product Description
PRS-ANM0085
Nordic Abrasion Machine, 220-240 V 50 Hz  (60 Hz version is available upon request)
PRS-ANM0085/110
Nordic Abrasion Machine, 110 V 60 Hz
PRS-ANM0086
Steel Balls, Ø 15 mm dia, 7 kg.
PRS-ANM0087
Steel Balls, Ø 11.1 mm dia, 3,5 kg.


STANDARDS : EN 1097-9; UNI 8520-13-16

Nordic Abrasion Machine has been developed for testing the resistance of aggregates to wear by abrasion from studded tyres. The test is performed on natural or artificial stones and aggregates between 11.2 mm and 16.0 mm.

The test consists of a rotating aggregate in a drum containing steel abrasive balls and water. The machine consists of an electronic control unit and a rolled stainless steel drum having an internal diameter of 206.5 mm, internal length of 335 mm and thickness of 6 mm. The drum is rotated at a speed of 90 ± 3 r.p.m. 3 wings are installed inside of the drum to allow the balls and aggregates to be mixed properly.


The abrasion loss rate of aggregates is calculated after the specified number of revolutions stated in the relevant standard.
110 V 60Hz version should be mentioned on order if required.
11,1 mm diameter steel balls ( 3.5 kg.) should be ordered separately.

The Nordic Abrasion Machine is supplied complete with;
Steel Balls, Ø 15 mm, 7 kg


Micro-Deval Apparatus

Product Code
Product Description
PRS-AMDA0400
Micro-Deval Apparatus, 220-240 V 50 Hz
PRS-AMDA0420/110
Micro-Deval Apparatus, 110 V 60 Hz
PRS-AMDA0421
Stainless Steel Drum Ø 200x154 mm                EN 1097-1
PRS-AMDA0422
Stainless Steel Drum Ø 200x400 mm                   EN 13450
PRS-AMDA0423
Micro-Deval Abrasion Charges Ø10 mm 25 kg Pack, EN 1097-1

 

STANDARDS : EN 1097-1, 13450; NF P18-572, P18-576; CNR No.109; UNE 83115

The Micro Deval Testing Machine is used to determine the resistance to wear of aggregates. The machine consists of a steel frame, two stainless steel cylinders, and 25 kg of 10 mm diameter stainless steel spheres and an automatic digital counter which allows machine to stop automatically at the preset number of revolutions.
Stainless steel drums are rotating at a speed of 100 ± 5 r.p.m.





The machine can accept up to 4 pcs. Ø 200x154 mm drums or 2 pcs. Ø 200x400 mm drums.
Ø 200x400 mm steel drums and 1,6 mm sieve should be ordered separately.



The Micro-Deval Apparatus is supplied complete with;
Stainless Steel Drum, Ø 200x154 mm, 2 pcs.
Abrasion Charges, 25 kg, Ø 10mm

Skid Resistance and Friction Tester

Product Code
Product Description
PRS-ASR0930/E
Skid Resistance and Friction Tester (Skid Tester), EN 1097-8
PRS-ASR0930/A
Skid Resistance and Friction Tester (Skid Tester), ASTM E303
PRS-ASR0932/TRL
Mounted Rubber Slider for Polished Stone Value Test (PSV laboratory), TRL Rubber, With Conformity Certificate, 32 mm width
PRS-ASR0933/TRL
Mounted Rubber Slider for Site Use, TRL Rubber, With Conformity Certificate, 76mm width
PRS-ASR0932/4S
Mounted Rubber Slider, 4S rubber, 32 mm width
PRS-ASR0933/4S
Mounted Rubber Slider, 4S rubber, 76 mm width
PRS-ASR0934
Metal Base Plate for Polished Stone Value Specimen Clamping,
PRS-ASR0935
Metal Base Plate for Surface Friction Properties for Natural Stones            (EN 1341, EN 1342) and Concrete Paving, Blocks (EN 1338)

STANDARDS  : EN 1097-8, 1338, 1341, 1342, 13036-4; ASTM E303

The Skid Resistance and Friction Tester is used for the measurement of surface friction properties.
The apparatus is suitable for both site and laboratory applications and for Polished Stone Value tests using curved specimens from accelerated polishing tests.
A Slider lifting system is integrated in the pendulum foot, which guarantees reliable adjustment operations.


Skid Tester provides following features:
New low friction release mechanism of the pendulum arm for better accuracy.
Extremely light pointer, for high precision result
Stiff and stout twin column structure
Easy and reliable height adjusting system
Integrated additional scale for tests on PSV specimens
Complete with traceability certificate to EN 1097-8 or ASTM E303

The Skid Resistance and Friction Tester is supplied complete with;
Additional Scale, for test on polished stone value specimens,
Rubber Sliders, for site use - 3 units,
Thermometer, 0 to +220°C for surface temperature measurement,
Washing Bottle, for surface wetting - 1 L,
Tool Set with Case for machine assembly,
Ruler for sliding length verification,
Traceability Certificate of conforming to EN 1097-8 or ASTM E303,
Carrying case


Accelerated Polishing Machine

Product Code
Product Description
PRS-AAPM310
Accelerated Polishing Machine (PSV),220-240 V 50-60 Hz
PRS-AAPM312
Corn Emery 5 kg,
PRS-AAPM313
Flour Emery 5 kg,
PRS-AAPM314
Control Stone 50 kg Ungraded, for, PSV value in the range 50 to 60
PRS-AAPM315
Friction Tester Reference Stone (Criggion Stone) 25 kg Ungraded, for, PSV value in the range 60 to 65


STANDARDS : EN 1097-8; BS 812-114

Accelerated Polishing Machine is used to accelerate the polishing action of vehicle tyres on a road surface, the resultsare used to develop safer road surfaces. The machine consists of a road wheel rotating at 320 ± 5 r.p.m, driven by a fan cooled electric motor.


Abrasive Corn Emery is fed to the point of contact of the wheel on the test surface for 3 hours, followed by feeding Emery Flour to polish the surface being tested for a further 3 hours. Subsequent skid tests are carried out on the test samples using suitable portable skid test equipment.

Control Stone and  Friction Tester Reference Stone should be ordered separately.

The Accelerated Polishing Machine is supplied complete with;
Road Wheel,
Side Plate,
Rubber Rings,
Solid Rubber- Tired Wheel - 2 units,
Drive Belt,
Abrasive Feed Mechanism,
Corn Emery - 5 kg,

Flour Emery - 5 kg,
Tool Kit,
Specimen Moulds - 2 pcs,
2 Mould Plates





Los Angeles Abrasion Machine

Product Code
Product Description
PRS–ALA200
Los Angeles Abrasion Machine (60 Hz version is available upon request)
PRS– ALA200/110
Los Angeles Abrasion Machine 110 V 60 Hz
PRS– ALA201
Los Angeles Abrasion Machine with Soundproof Safety Cabinet      220-240 V 50Hz
PRS– ALA201/110
Los Angeles Abrasion Machine with Soundproof   Safety Cabinet,    110 V 60 Hz
PRS–ALA202/E
Los Angeles Abrasion Charges EN,12 pcs.
PRS–ALA202/A
Los Angeles Abrasion Charges ASTM/AASHTO, 12 pcs.
PRS–ALA205
Soundproof Safety Cabinet for Los Angeles Abrasion Machine

 

STANDARDS : EN 1097-2, 12697-17, 13450; ASTM C131, C535; AASHTO T96

The Los Angeles Abrasion Machine is used for determination of the aggregates resistance to fragmentation.
The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm.


The drum is rotated at a speed of 31-33 r.p.m. The internal shelf provided with the machine confirms to ASTM, AASHTO and EN standards.

The machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically.

 The drum is equipped with an interlock device which allows the operator to lock the drum into position for easy loading/unloading of the sample.

A steel tray is supplied with the machine for easy discharge of specimen and abrasive charges.
The standard model can be supplied with a safety/noise reduction cabinet.

The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

The cabinet must be ordered with the Los Angeles machine if required, as the electronic control unit will be installed on the safety cabinet at the time of manufacture.
The cabinet is equipped with an electric safety device which automatically stops the rotation of the drum when the door is opened, conforming to CE directives.

Abrasion balls and 1.6 mm, 10mm, 11.2mm (or 12.5mm) and 14 mm sieves acc. to EN standard
Abrasion balls, 1.7 mm( No.12) sieve and other sieves which chance depending the grain size acc. to ASTM and AASHTO standards, should be ordered separately.




   The Los Angeles Abrasion Machine is supplied complete with;
       Steel Tray

Aggregate Sieve Test Set, Ø 200 mm

Product Code Product Description PRS-AELK200 Aggregate Sieve Test Set, Ø 200 mm STAND...